SECTION 000001 - TABLE PLACEMENT
1.1 RELATED DOCUMENTS
A. Enclosed construction drawings might apply to this section.
A. Section Includes:
1. Table Alignment
2. Shim Placement
B. Related Requirements:
1. Section 000002 "Projector Setup"
2. Section 000003 "Drawing Placement"
1.3 TABLE ALIGNMENT
A. Align the table using what appears to be its longest edge, as shown in drawings.
B. Set this apparent longest edge roughly parallel to the board, at a distance of about 3'-0" from the board.
C. Align the center of the longest edge by eye to the center of the board.
1.4 SHIM PLACEMENT
A. The table may contact the ground with three of its four outer legs.
B. Use the Staples Giant Doorstop enclosed between the fourth outer leg and the ground, to provide a fourth point of contact.
END OF SECTION 000001